Hoewel we ruime ervaring hebben met de productie van deze gasturbineonderdelen, vragen we u toch om de bijbehorende technische tekeningen of een monster (ook gebruikte of licht beschadigde monsters zijn geschikt) voor reverse engineering. Dit zorgt ervoor dat de geproduceerde onderdelen de beste compatibiliteit en optimale prestaties bieden.
Mocht u iets nodig hebben, aarzel dan niet om neem contact op met ons team van experts! We staan altijd klaar om je met veel enthousiasme te helpen.
| No. | Naam | P/N | Manufacturer | Qty | UoM |
| 1 | Blades stage 1 | 2460801 | Siemens | 1 | set |
| 2 | Blades stage 2 | 2460867 | Siemens | 1 | set |
| 3 | Temperature sensor HG4270 | 1CSA13421-1 | Siemens | 2 | Pcs. |
| 4 | Temperature sensor HG4223 | 1CSA13425-1 | Siemens | 2 | Pcs. |
| 5 | Spark plug HG5085 | 2427063-1 | Siemens | 1 | Pcs. |
| 6 | Gasket HG5085 Siemens | 2415046-2 | Siemens | 8 | Pcs. |
| 7 | Spring washer HG5085, 25.4/17×3.2 | T3907-186 | Siemens | 1 | Pcs. |
| 8 | Ignition unit HG5085, 352x263x264 | 2460571-1 | Siemens | 1 | Pcs. |
| 9 | Fuel injector HG5051 | 2464875-B | Siemens | 18 | Pcs. |
| 10 | Gasket HG5051 | 2420792-1 | Siemens | 36 | Pcs. |
| 11 | Hex head screw HG5051, M16Tx45 mm | T1663-629 | Siemens | 108 | Pcs. |
| 12 | Hex socket head screw HG5051, M16Tx40 mm | 21217008-77 | Siemens | 108 | Pcs. |
| 13 | Spring washer HG5051, 25.4/17×3.2 | T3907-186 | Siemens | 216 | Pcs. |
| 14 | Combustion chamber HG5180 | 2463029-B | Siemens | 1 | Pcs. |
| 15 | Rolled spring washer HG5180 | T3905-165 | Siemens | 18 | Pcs. |
| 16 | Screw HG5180 | 2460940-1 | Siemens | 18 | Pcs. |
| 17 | Rolled spring washer HG5180, 10.5x26x1 mm | T3910-173 | Siemens | 18 | Pcs. |
| 18 | Gasket HG5220, NPS 1 1/2″Cl 300/600 | 21528015-305 | Siemens | 2 | Pcs. |
| 19 | Gasket HG5220, NPS 2 1/2″Cl 300/600 | 21528015-305 | Siemens | 2 | Pcs. |
| 20 | Turbine blade, stage 1 HG5800 | 2462217-B | Siemens | 54 | Pcs. |
| 21 | Locking plate HG5800 | 2461255-A | Siemens | 64 | Pcs. |
| 22 | Locking plate HG5800 | 2461256-1 | Siemens | 54 | Pcs. |
| 23 | Locking plate HG5800 | 2461252-1 | Siemens | 54 | Pcs. |
| 24 | Locking plate HG5800 | 2461249-A | Siemens | 64 | Pcs. |
| 25 | Turbine blade, stage 2 HG5800 | 2462071-A | Siemens | 60 | Pcs. |
| 26 | Seal HG5800 | 2462550-A | Siemens | 70 | Pcs. |
| 27 | Seal HG5800 | 2463680-A | Siemens | 60 | Pcs. |
| 28 | Locking plate HG5800 | 2461273-1 | Siemens | 60 | Pcs. |
| 29 | Guide blade HG5900 | 2461995-A | Siemens | 32 | Pcs. |
| 30 | Labyrinth ring HG5900 | 2461977-A | Siemens | 1 | Pcs. |
| 31 | Stud HG5900 | 51051417-1 | Siemens | 16 | Pcs. |
| 32 | Sealing tape HG5900 | 2415394-2 | Siemens | 32 | Pcs. |
| 33 | Support ring HG5900 | 2461291-1 | Siemens | 1 | Pcs. |
| 34 | Sealing tape HG5900 | 2415395-4 | Siemens | 32 | Pcs. |
| 35 | Washer HG5900 | 21517002-208 | Siemens | 8 | Pcs. |
| 36 | Hex nut HG5900, M10 | T2804-120 | Siemens | 16 | Pcs. |
| 37 | Segment HG5900 | 2415445-B | Siemens | 8 | Pcs. |
| 38 | Segment HG5900 | 2415456-B | Siemens | 8 | Pcs. |
| 39 | Spring washer HG5900, M10, 20x27x1 mm, d=11 mm | 21517003-35 | Siemens | 20 | Pcs. |
| 40 | Hex head screw HG5900, M10Tx35 mm | 21217001-315 | Siemens | 16 | Pcs. |
| 41 | Spring washer HG5900 | T3905-178 | Siemens | 3 | Pcs. |
| 42 | Cotter pin HG5900 | T1253-183 | Siemens | 3 | Pcs. |
| 43 | Sealing plate HG5900 | 51051305-1 | Siemens | 8 | Pcs. |
| 44 | Segment HG5900 | 2461292-1 | Siemens | 16 | Pcs. |
| 45 | Guide vane 2 HG5900 | 2461792-E | Siemens | 28 | Pcs. |
| 46 | Guide vane, borescope HG5900 | 2461792-F | Siemens | 1 | Pcs. |
| 47 | Heat shield 1 HG5900 | E1B100006241 | Siemens | 40 | Pcs. |
| 48 | Pin HG5900 | 2415488-2 | Siemens | 40 | Pcs. |
| 49 | Sealing strip HG5900 | 2415558-1 | Siemens | 29 | Pcs. |
| 50 | Level HG5900 | 2464012-1 | Siemens | 24 | Pcs. |
| 51 | Spring washer HG5900 | 21517003-33 | Siemens | 29 | Pcs. |
| 52 | Seal HG5900 | 2462543-1 | Siemens | 24 | Pcs. |
| 53 | Heat shield 2 HG5900 | 2463527-A | Siemens | 16 | Pcs. |
| 54 | Heat shield 2 HG5900 | 2463527-B | Siemens | 4 | Pcs. |
| 55 | Heat shield 2 HG5900 | 2463527-C | Siemens | 4 | Pcs. |
| 56 | Segment HG5900 | 2462510-1 | Siemens | 40 | Pcs. |
| 57 | Segment HG5900 | 2463027-1 | Siemens | 40 | Pcs. |
| 58 | Cylindrical pin HG5900 | 21117004-252 | Siemens | 40 | Pcs. |
| 59 | Clumsy plate | 2461270-1 | Siemens | 54 | Pcs. |
| 60 | Clumsy plate | 2461271-1 | Siemens | 60 | Pcs. |
| 61 | Clumsy plate | 2461257-1 | Siemens | 54 | Pcs. |
| 62 | Clumsy plate | 2461272-1 | Siemens | 60 | Pcs. |
| 63 | Turbine disk 1 st. HG5800 | 2462217-B | Siemens | 1 | Pcs. |
| 64 | Turbine disk 2 st. HG5800 | 2462071-A | Siemens | 1 | Pcs. |
| 65 | Input element for CS HG5850 | 2460878-1 | Siemens | 18 | Pcs. |
| 66 | Cone-shaped tube of flame sensor HG5850 | 2415682-1 | Siemens | 2 | Pcs. |
| 67 | Gasket HG5850 | 2415046-1 | Siemens | 18 | Pcs. |
| 68 | Reinforced gasket HG5850 | 2510192-1 | Siemens | 4 | Pcs. |
| 69 | Flame sensor glass HG5850 | 51054666-1 | Siemens | 2 | Pcs. |
| 70 | Gasket for flame sensor glass HG5850 | 51054665-2 | Siemens | 4 | Pcs. |
| 71 | Gasket for flame sensor glass HG5850 | 51054665-1 | Siemens | 8 | Pcs. |
| 72 | Sheet gasket HG5261 | Т3712-225 | Siemens | 2 | Pcs. |
| 73 | Sheet gasket HG5261 | Т3712-177 | Siemens | 1 | Pcs. |
| 74 | Sheet gasket HG5261 | Т3712-224 | Siemens | 2 | Pcs. |
| 75 | Air manifold gasket HG5220 | 21528015-305 | Siemens | 2 | Pcs. |
| 76 | Air manifold gasket HG5220 | 21528015-307 | Siemens | 2 | Pcs. |
| 77 | Hex head screw HG5180, M8Tx20 mm | T1663-451 | Siemens | 18 | Pcs. |
| 78 | Rotor labyrinth seal 1.02 m | 2409400-3 | Siemens | 23 | Pcs. |
| 79 | Rotor labyrinth seal 0.99 m | 2409400-2 | Siemens | 7 | Pcs. |
| 80 | Locking wire for labyrinth seals | 13208006-119 | Siemens | 50 | Pcs. |
| 81 | Central seal bushing | 51054930-1 | Siemens | 1 | Pcs. |
| 82 | Seal of compressor housing plugs | 21528001-18 | Siemens | 2 | Pcs. |
| 83 | Borgring | A2802154-120 | Siemens | 8 | Pcs. |
| 84 | O-ring | T4955-307 | Siemens | 16 | Pcs. |
| 85 | Pulsation sensor gasket | 2415046-3 | Siemens | 1 | Pcs. |
Kom nu in actie
Tekeningen of gebruikte monsters voor reverse engineering.
Neem contact op met een deskundige: peter@turbineblade.net
WhatsApp: +86 135 4409 5201
Waarom voor ons kiezen?
- Meer dan 15 jaar ervaring — Meer dan 100.000 bladen geleverd aan meer dan 30 klanten wereldwijd.
- Volledig uitgeruste toeleveringsketen – 5-assige CNC-machines, ovens voor gerichte stolling en industriële CT-scanners
- Wereldwijde erkenning: samenwerking met Siemens, Mitsubishi en andere toonaangevende bedrijven in de energiesector.
Dutch 
English 
Arabic 
Moroccan Arabic 
French 
German 
Italian 
Polish 
Portuguese 
Russian 
Spanish 
Turkish 
Azerbaijani 
Indonesian 
Thai 
Japanese 
Korean 
Malay 
Myanmar 
Serbian 
Swedish 
Vietnamese