Hoewel we ruime ervaring hebben met de productie van deze gasturbineonderdelen, vragen we u toch om de bijbehorende technische tekeningen of een monster (ook gebruikte of licht beschadigde monsters zijn geschikt) voor reverse engineering. Dit zorgt ervoor dat de geproduceerde onderdelen de beste compatibiliteit en optimale prestaties bieden.
Mocht u iets nodig hebben, aarzel dan niet om neem contact op met ons team van experts! We staan altijd klaar om je met veel enthousiasme te helpen.
| # | Part Number | Materiaal | Beschrijving | quantity |
| 1 | 13108011-2 | Afdichtingsplaat | 4 | |
| 2 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 20 |
| 3 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 12 |
| 4 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 2 |
| 5 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 20 |
| 6 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 12 |
| 7 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 2 |
| 8 | 17108001-143 | Afdichtingsplaat | 8 | |
| 9 | 1851523-1 | Tepel | 6 | |
| 10 | 1852416-1 | Tepel | Threaded steel pipe connector (nozzle) R 1/4 NW4 4 MPa | 8 |
| 11 | 1852417-1 | Tepel | 4 | |
| 12 | 18531924-2 | Sealing | 2 | |
| 13 | 18539190-701 | Tape, sealing strip | 2 | |
| 14 | 18539190-703 | Sealing Tape | 2 | |
| 16 | 1CSA10225-1 | Braided packing | Steel braided gasket | 8 |
| 17 | 1CSA10225-1 | Braided packing | Steel braided gasket | 8 |
| 18 | 1CSA13519-1 | Slang | Steel-reinforced rubber hose, without fittings | 4 |
| 19 | 1CSA13519-1 | Slang | Steel-reinforced rubber hose, without fittings | 4 |
| 20 | 1CSA13612-1 | Borstel | 4 | |
| 21 | 1CSA16485-1 | Slang | 8 | |
| 22 | 1CSA20707-1 | Lashing wire | 2 | |
| 22 | 1CSA7988-1 | Slang | Steel-reinforced rubber hose, without fittings | 5 |
| 24 | 1CSA7988-1 | Slang | Steel-reinforced rubber hose, without fittings | 5 |
| 25 | 1CSA8130-1 | Huls | for tester | 40 |
| 26 | 1CSA8133-1 | Coupling | 2 | |
| 27 | 1CSA8135-1 | Tepel | 6 | |
| 28 | 1CSA8136-1 | Nut | Compression nut for fitting. | 6 |
| 29 | 1CSA8257-1 | Pakking | 10 | |
| 30 | 1CSA8258-1 | Pakking | 34 | |
| 31 | 1CSA8261-1 | Coupling | Tee (connector for pvc pipe 6 mm) | 4 |
| 32 | 1CSA8262-1 | Coupling | Connector (connector for pvc pipe 6 mm) | 4 |
| 33 | 1CSA8263-1 | Coupling | Straight connector (connector for pvc pipe 6 mm) | 4 |
| 34 | 2035929-2 | Leidingkoppeling | 4 | |
| 35 | 21517002-162 | Borgring | 12 | |
| 36 | 21517002-175 | Borgring | 32 | |
| 37 | 21517002-195 | Washer | 106 | |
| 38 | 21517002-197 | Washer | 12 | |
| 39 | 21528011-1 | Gasket rubber | 8 | |
| 40 | 22110348-4 | Bearing pad | bearing seal/steel/ | 4 |
| 41 | 22110348-7 | Bearing bush | bearing bushing/steel/ | 4 |
| 44 | 2219300-4 | Bearing insulation | insulation/protection/bearings/teflon/ | 8 |
| 45 | 2219300-5 | Bearing insulation | insulation/protection/bearings/teflon/ | 4 |
| 46 | 2219303-4 | Slang | 16 | |
| 47 | 2415046-2 | Pakking | 6 | |
| 48 | 2420018-D | Guide vane No 2, boroscope | 2 | |
| 49 | 2420027-C | Guide vane No 3, boroscope | 2 | |
| 50 | 2420050-1 | Shim Washer | 240 | |
| 51 | 2420137-1 | Lock plate blade 1 | 12 | |
| 52 | 2420139-1 | Lock plate blade 2 | 12 | |
| 53 | 2420141-1 | Lock plate blade 3 | 12 | |
| 54 | 2420143-1 | Sealing Blade 2 | 190 | |
| 55 | 2420144-1 | Sealing blade 3 | 150 | |
| 56 | 2420211-1 | Sealing Seal strip | 30 | |
| 57 | 2420212-1 | Sealing E-sealing | 2 | |
| 58 | 2420470-4 | Plate Outer vane plate | 50 | |
| 59 | 2420475-1 | Sealing Outer seal strip | 116 | |
| 60 | 2420476-1 | Sealing Inner seal strip | 116 | |
| 61 | 2420477-1 | Sealing Seal strip | 60 | |
| 62 | 2420490-1 | Lock nut Of steel | 20 | |
| 63 | 2420492-4 | Plate Inner vane plate | 50 | |
| 64 | 2420534-1 | Sealing Outer sealstrip | 114 | |
| 65 | 2420536-1 | Sealing Outer sealstrip | 60 | |
| 66 | 2420702-1 | Lock washer (folded) | 66 | |
| 67 | 2420702-2 | Lock washer (folded) | 56 | |
| 68 | 2420703-1 | Retaining ring | 110 | |
| 69 | 2420703-2 | Retaining ring | 110 | |
| 70 | 2420708-1 | Borgring | 210 | |
| 71 | 2420792-1 | Pakking | 120 | |
| 72 | 2421172-C | Guide vane 3, temp. meas. | 4 | |
| 73 | 2421227-1 | Pakking | 4 | |
| 74 | 2421235-1 | Pakking | 32 | |
| 75 | 2421283-1 | Gasket Square gasket | 4 | |
| 76 | 2421284-1 | Gasket Square gasket | Steel gasket, square-shaped | 4 |
| 77 | 2421466-1 | Pakking | Steel gasket | 8 |
| 78 | 2421514-1 | Pakking | Steel gasket | 4 |
| 79 | 2421514-2 | Pakking | Steel gasket | 4 |
| 80 | 2421910-1 | Spacer ring | Steel spacer ring | 60 |
| 81 | 2421910-2 | Spacer ring | Steel spacer ring | 60 |
| 82 | 2421910-3 | Spacer ring | Steel spacer ring | 60 |
| 83 | 2421910-4 | Spacer ring | Steel spacer ring | 60 |
| 84 | 2422868-1 | Gasket Armco | Steel gasket | 4 |
| 85 | 2422868-2 | Gasket Armco | Steel gasket | 8 |
| 86 | 2422868-3 | Gasket Armco | Steel gasket | 2 |
| 87 | 2422868-5 | Gasket Armco | Steel gasket | 16 |
| 88 | 2422868-6 | Gasket Armco | Steel gasket | 12 |
| 89 | 2422868-7 | Gasket Armco | Steel gasket | 2 |
| 90 | 2422909-A | Guide vane no. 3 machined | 100 | |
| 91 | 2422954-A | Guide vane Turb.guide vane2 | The guide blade of the 2nd stage, part of the turbine SGT-800 | 98 |
| 92 | 2423108-2 | Pakking | The guide blade of the 2nd stage, part of the turbine SGT-800, to stabilize and equalize the flow of incoming gas, is an integral part of the stator of the power turbine SGT800 | 2 |
| 93 | 2423255-1 | Sealing Inner seal strip | Steel sealing strip | 114 |
| 94 | 2423313-1 | Hitteschild | The heat shield, part of the SGT-800 turbine, is part of the stator of the SGT-800 gas turbine, designed to protect the stator above the upper part of the rotor blade from the temperature effects exerted by the flow of working gases | 100 |
| 95 | 2423340-1 | Sealing Rear seal strip | Sealing strip steel 1 guide | 60 |
| 96 | 2423463-1 | Sealing Inner sealstrip | 60 | |
| 97 | 2423483-A | Guide vane Vane 1 Complete | The guide blade of the 1st stage, part of the turbine SGT-800, for stabilizing and leveling the flow of incoming gas, is an integral part of the stator of the power turbine SGT800 | 100 |
| 98 | 2423585-1 | Sealing blade 1 | 190 | |
| 99 | 2423587-1 | Lock plate blade1 | Rotor blade locking plate No. 1 | 6 |
| 100 | 2423623-1 | Sealing ring C-seal | Sealing ring C-seal | 2 |
| 101 | 2423623-2 | Sealing ring C-seal | Sealing ring C-seal | 4 |
| 102 | 2423623-3 | Sealing ring C-seal | Sealing ring C-seal | 10 |
| 103 | 2423682-A | Guide vane No 2, Temp (set) | The guide blade 2, a temporary part of the turbine SGT-800, for converting the energy of the incoming gas stream into the rotational energy of the turbine rotor, is an integral part of the rotor of the power turbine SGT800 | 4 |
| 104 | 2423699-H | Verbrandingskamer | 2 | |
| 105 | 2424155-1 | Sealing | 190 | |
| 106 | 2424253-B | Set of turbine blades (87 pcs) | 2 | |
| 107 | 2424254-A | Turbine blade | 2 | |
| 108 | 2424255-1 | Turbine blade | 2 | |
| 109 | 2424285-1 | Sealing ring | Sealing ring | 466 |
| 110 | 2425146-1 | Sealing | 280 | |
| 111 | 2423560-A | Burner | 60 | |
| 112 | 2425772-1 | Washer | 12 | |
| 113 | 2591038-1 | Air filter | Instrument air cleaning filter (air filter) in air supply system of gas turbine plant, consists of plastic base in the form of cylinder and foam insert, using mechanical cleaning method | 8 |
| 114 | 3820538-1 | Pipe connector Qvick- | Steel pipe connector (single pipe) 4MPa with internal thread | 20 |
| 115 | 3820538-3 | Leidingkoppeling | Steel pipe connector (connecting tube) 4MPa with internal thread | 4 |
| 116 | 3BSM000248-1 | Diode | Diode | 12 |
| 117 | 3BSM000249-1 | Thyristor | Thyristor | 4 |
| 118 | 3BSM000313-A | Measuring module | Measuring module for determination of gross and maximum one-time emissions of pollutants into the atmosphere during operation of gas turbines | 2 |
| 119 | 3BSM001840 | Pakking | 16 | |
| 120 | 3BSM006601-1 | Cooler | 2 | |
| 122 | 3BSM007334-A | Shaft sealing – set of spares | The set for shaft sealing consists of: seal (steel) – 1 pc., gasket (steel) – 1 pc., steel guide – 1 pc. | 8 |
| 123 | 3BSM011092-1 | Grounding tool | 2 | |
| 125 | 3BSM013161-1 | Slang | 12 | |
| 126 | 4395917-2 | Brush holder | 2 | |
| 128 | 5695418-29 | Resistance ther. det. rtd PT 100 ohm | For generator | 2 |
| 129 | 5695420-7 | Temperature transducer | For generator | 2 |
| 130 | 66770037-B | Heater | 2 | |
| 131 | 66770037-C | Heating element | 2 | |
| 132 | 70006131-A | Leidingkoppeling | Steel pipe connector (connecting tube) 4MPa, smooth | 4 |
| 133 | 70006131-B | Leidingkoppeling | Steel pipe connector (connecting tube) 4MPa, smooth | 4 |
| 134 | 70006131-C | Leidingkoppeling | Steel pipe connector (connecting tube) 4MPa, smooth | 2 |
| 135 | 70006131-D | Leidingkoppeling | Steel pipe connector (connecting tube) 4MPa, smooth | 4 |
| 136 | 70006131-E | Leidingkoppeling | Steel pipe connector (connecting tube) 4MPa, smooth | 2 |
| 137 | A0102154-54 | Retaining ring | Steel retaining ring | 456 |
| 138 | A043R6463080 | Strip punched band | Perforated 10M tape, steel | 9 |
| 139 | A043R6463080 | Strip punched band | Perforated 10M tape, steel | 9 |
| 140 | A1551160-11 | Drying paper | Synthetic wiping material | 7 |
| 141 | A1551160-12 | Tape | Self-adhesive masking paper tape 25 mm | 6 |
| 142 | A1551160-14 | Tape | Rubberized tape (non-porous rubber reinforced with synthetic fabric), width 38 mm, length 5 m, thickness 2 mm | 10 |
| 143 | A1552154-83 | Borgring | 14mm locking steel washer | 12 |
| 144 | A1552154-86 | Lock washer with two tabs | 16mm steel washer | 20 |
| 145 | A1554944-3 | Storage, non-re-chargeable | Battery not rechargeable, alkaline, 1.5V LR6 | 20 |
| 146 | A1554944-8 | Battery | Battery not rechargeable, alkaline, LR03 | 20 |
| 147 | A1556846-35 | Grinding material | Sandpaper 100 | 40 |
| 148 | A1556846-36 | Grinding material | Lapping material KORN 180 (sandpaper) | 20 |
| 149 | A1556846-37 | Grinding material | Sandpaper 220 | 20 |
| 150 | A1556860-12 | Muurborstel met vlekkenpatroon | End brush for spot painting | 10 |
| 151 | A1556950-38 | Refuse sack | Container 160 liters, for garbage (non-food waste bag, polyethylene) | 40 |
| 152 | A2441176-48 | Artline Paint Marker 400 XF | Plastic marker | 10 |
| 153 | A2802152-647 | Sealing tape | Steel sealing tape B = 8mm, L = 8 m/Ru, with rolling treatment | 4 |
| 154 | A3496860-41 | Textiles, other | Synthetic wiper (158 x 224 fabric) | 40 |
| 155 | A4431160-63 | Tape | Sealing tape for thread, Teflon, single layer, thickness 0.2 mm, rectangular, in rolls, with vertical edge without protrusions | 2 |
| 156 | A606E0754113 | Tape | Self-adhesive insulation tape 10 m x 19 mm x 0.22 mm, in a roll, made of plasticized polyvinyl chloride, for insulation of electrical connections | 10 |
| 157 | A606E1516082 | Connection material | Plastic connector | 400 |
| 158 | A7761320-17 | Cable strip | Plastic clamp for fixing cables, size 4.6 x 200 mm | 200 |
| 159 | A8212962-21 | Kluisje | Plastic container (box) for storing plastic markers, no tray, white color, size 200 x 350 x 80 mm | 30 |
| 160 | A8212962-22 | Kluisje | Plastic container (box) for storing plastic markers, no tray, white color, size 200 x 350 x 80 mm | 70 |
| 161 | A8212962-23 | Kluisje | Plastic container (box) for storing plastic markers, no tray, white color, size 200 x 350 x 80 mm | 30 |
| 162 | T1253-239 | Split pin | Steel pin 14 mm | 8 |
| 163 | T1665-542 | Zeskantbout | Hexagon head bolt, diameter 14mm, steel | 20 |
| 164 | T1873-538 | Hexagon sockethead screw large clearance | 16mm High Clearance Hexagon Head Screw | 28 |
| 165 | T3622-178 | Washer | 13mm locking steel washer | 16 |
| 166 | T3623-173 | Washer | 14mm locking steel washer | 8 |
| 167 | T3704-108 | Point gasket | Steel connecting gasket | 10 |
| 168 | T3706-133 | Gasket metal sheeted | Metallized steel gasket | 6 |
| 169 | T3706-138 | Pakking | Steel gasket | 2 |
| 170 | T3711-315 | Plaatpakking | Non-porous rubber sheet gasket | 4 |
| 171 | T3711-319 | Plaatpakking | Flat gasket, cardboard | 12 |
| 172 | T3712-220 | Sheet gasket acc. to EN | Steel plate gasket | 16 |
| 173 | T3712-221 | Sheet gasket acc. to EN | Plate gasket 141x192x1 steel | 14 |
| 174 | T3712-222 | Plaatpakking | Steel plate gasket | 32 |
| 175 | T3712-224 | Plaatpakking | Steel gasket | 8 |
| 176 | T3712-225 | Plaatpakking | Steel gasket | 2 |
| 177 | T3712-226 | Plaatpakking | Plate gasket DN300/PN16 steel | 2 |
| 178 | T3712-314 | Pakking | 12 | |
| 179 | T3712-317 | Sheet gasket acc. to EN | Steel plate gasket | 4 |
| 180 | T3712-318 | Sheet gasket acc. to EN | Steel plate gasket | 6 |
| 181 | T3712-324 | Plaatpakking | Plate gasket DN200/PN40 steel | 2 |
| 182 | T3725-179 | Pakking | Steel gasket | 16 |
| 183 | T3904-173 | Borgring | Locking washer, diameter 14 mm, steel | 80 |
| 184 | T3904-174 | Lock washer Bright galvanize | 248 | |
| 185 | T3904-178 | Borgring | Locking washer, diameter 14 mm, steel | 334 |
| 186 | T3905-165 | Lock washer (folded) | Locking washer M14 (diameter 14 mm), steel | 110 |
| 187 | T3905-178 | Lock washer (folded) | Locking washer M16 (diameter 16 mm), steel | 1644 |
| 188 | T3905-186 | Lock washer Stainless steel | Locking washer stainless steel 13 mm | 30 |
| 189 | T3907-153 | Borgring | Locking washer M16 (diameter 16 mm), steel | 16 |
| 190 | T3907-165 | Borgring | Locking washer 14 mm steel | 20 |
| 191 | T3907-178 | Borgring | Locking washer, diameter 14 mm, steel | 1412 |
| 192 | T3907-179 | Lock washer Nordlock | Locking washer 13mm steel | 322 |
| 193 | T3907-186 | Borgring | Locking washer M16 (diameter 16 mm), steel | 1474 |
| 194 | T3907-192 | Borgring | Locking washer M20 (diameter 20 mm), steel | 214 |
| 195 | T3910-173 | Lock washer (folded) | Locking washer M16 (diameter 16 mm), steel | 8 |
| 196 | T3910-179 | Lock washer (folded) | Locking washer, diameter 14 mm, steel | 62 |
| 197 | T3910-185 | Lock washer (folded) | Locking washer (bent) 17mm, steel | 130 |
| 198 | T3910-204 | Lock washer (folded) | Locking washer, 31X63X1,5, steel | 6 |
| 199 | T6102-101 | Sluitmoer | Connecting nut, diameter 14 mm, steel | 10 |
| 200 | T6313-101 | Stekker | Stainless steel threaded pipe connector, 4 MPa | 4 |
| 201 | T6815-102 | Leidingkoppeling | Connecting tube (pipe connector) steel, smooth, 4 MPa | 4 |
| 202 | T6815-802 | Leidingkoppeling | Stainless steel threaded pipe connector, 4 MPa | 4 |
| 203 | T6820-102 | Pipe coupling, straight | Steel coupling, smooth, 4 MPa | 4 |
| 204 | T6830-101 | Union | Sleek steel (fitting) pipe joint for insertion, maximum pressure 4MPa, stainless steel | 2 |
| 205 | T6870-101 | Tee connector | Smooth steel T-joint | 2 |
| 206 | T7021-101 | Ferrule | Ring, steel | 10 |
Kom nu in actie
Tekeningen of gebruikte monsters voor reverse engineering.
Neem contact op met een deskundige: peter@turbineblade.net
WhatsApp: +86 135 4409 5201
Waarom voor ons kiezen?
- Meer dan 15 jaar ervaring — Meer dan 100.000 bladen geleverd aan meer dan 30 klanten wereldwijd.
- Volledig uitgeruste toeleveringsketen – 5-assige CNC-machines, ovens voor gerichte stolling en industriële CT-scanners
- Wereldwijde erkenning: samenwerking met Siemens, Mitsubishi en andere toonaangevende bedrijven in de energiesector.
Dutch 
English 
Arabic 
Moroccan Arabic 
French 
German 
Italian 
Polish 
Portuguese 
Russian 
Spanish 
Turkish 
Azerbaijani 
Indonesian 
Thai 
Japanese 
Korean 
Malay 
Myanmar 
Serbian 
Swedish 
Vietnamese